|
|
| AIRBOOST FAN ASSISTED FLOOR TILES |
|
|
 Adjustable controls allow multiple settings of air-flow depending on the amount needed at any certain time.
The Airboost fan assisted system offers direct cooling to those hard to cool areas where clusters of high-density servers have created hotspots. Adjustable controls allow multiple settings of air-flow depending on the amount needed at any certain time. The adjustment of fan speed is made from the top of the tile to allow quick and easy fan control. Closed loop (Temperature controlled) speed control available as an option.
No downtime or movement of racks is required for the installation of an Air-Boost unit and one Air-Boost can provide cooling for two or three adjacent racks. If larger areas require cooling, multiple Air-Boost units can be used at the same time. |
|
|
|
 Airboost can be considered a “greening” solution as well. Many times data centers are kept cooler than necessary just to cool a few high density areas. This over-cooling is used to keep the hotspots under control but with a Airboost solution in place, the overall room temperature can be increased as the Airboost will control the individual and problematic hotspots without requiring an over-cooled data center. |
|
|
|
|
|
|
TYPICAL INSTALLATION |
| FAN SPECIFICATIONS |
| |
|
|
|
| Wall ring |
Die Cast Aluminium |
Type of Protection |
IP 44 |
| Blades |
Steel Sheet, coated in Black |
Insulation Class |
B |
| Number of Blades |
7 |
Bearings |
Maintenance –Free Ball Bearing |
| RPM |
2550 |
Motor Protection |
TOP wired internally |
| Approvals |
VDE, UL, CSA, CCC, GOST |
Protection Class |
I |
| |
|
Product Confirming to Standards |
EN 60335-1, CE |
|
|
Air Flow Evaluation Case-I |
Air Flow Evaluation Case-II |
| Under Floor Static Pressure .029 inches/H2O |
Under Floor Static Pressure .013 inches/H2O |
| Airflow with Air Boost |
Airflow with Air Boost |
| High: 1508 CFM |
High: 1696 CFM |
| Medium: 1350 CFM |
Medium: 1410 CFM |
| Low: 960 CFM |
Low: 725 CFM |
| Off: 539 CFM |
Off: 240 CFM |
| Product Confirming to Standards |
EN 60335-1, CE |
| Server Cabinet inlet temperature at the top of the rack |
| Before AirBoost: 26.8 °C |
| After AirBoost: 22.7 °C |
|
|
About NGBPS
Products
Services
Partner
Download
